STIHL Manual Sweeper

The STIHL Manual Sweeper is a lightweight, ergonomic yard cleaning tool designed for efficient collection of leaves, grass clippings, and light debris. It features a durable polypropylene hopper, adjustable handle, soft-grip handles, and a wide sweeping head with replaceable bristles. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sweeping head with replaceable bristles, Polypropylene hopper, Adjustable aluminum handle, Soft-grip handles, Debris release lever.

Assembly Instructions

Unpack all components and inspect for damage.

1. Attach handle: Insert aluminum handle into mounting bracket, secure with provided bolts.
2. Install wheels: Slide wheels onto axle, secure with retaining clips.
3. Attach sweeping head: Connect head to frame using pivot pins.
4. Install hopper: Slide hopper onto frame until it clicks into place.
5. Adjust handle height: Set to comfortable position using adjustment lever.

WARNING! Use proper tools for assembly. Ensure all connections are tight before use.

First-Time Setup

Complete assembly, then prepare for first use.

1. Inspect bristles: Ensure sweeping head bristles are properly aligned and undamaged.
2. Test release lever: Operate debris release mechanism several times to ensure smooth operation.
3. Adjust handle: Set to appropriate height for user (typically waist level).
4. Check wheels: Ensure wheels rotate freely without obstruction.

CAUTION! Do not use if any components are damaged or improperly assembled.

Specifications

• Sweeping Width: 24 inches (61 cm)
• Hopper Capacity: 20 gallons (75.7 liters)
• Handle: Adjustable aluminum, 3 positions
• Weight: 8.5 lbs (3.9 kg) empty
• Wheels: Two 8-inch (20 cm) ball bearing wheels
• Bristle Material: Durable nylon
• Frame Material: Powder-coated steel
• Hopper Material: UV-resistant polypropylene
• Recommended For: Leaves, grass clippings, light debris

Controls and Adjustments

Handle Height Adjustment: Release lever, set to desired position (Low, Medium, High). Debris Release: Pull lever upward to open hopper gate. Sweeping Angle: Adjust head angle by loosening pivot bolt.

Optimal Settings: Set handle so user can maintain straight back while sweeping. Adjust head angle for surface type (flat for pavement, angled for grass).

Operating Instructions

Proper technique ensures efficient sweeping.

1. Position sweeper: Hold handles with both hands, maintain comfortable stance.
2. Begin sweeping: Push sweeper forward in smooth, overlapping strokes.
3. Collect debris: Bristles direct material into hopper as you push.
4. Empty hopper: When full, pull release lever while tilting sweeper backward.
5. Resume sweeping: Close hopper gate and continue.

Tip: Work with the wind when possible to prevent debris blowback.

Sweeping Techniques

Maximize efficiency with proper techniques.

1. Overlapping strokes: Overlap each pass by 4-6 inches for complete coverage.
2. Pavement technique: Use flat head angle for hard surfaces.
3. Grass technique: Slightly angle head upward to avoid digging into turf.
4. Wet leaves: Make lighter, quicker passes to prevent clogging.
5. Large areas: Work in sections, clearing debris as you go.

WARNING! Do not use on gravel surfaces as stones may damage bristles.

Maintenance & Care

Regular maintenance ensures long service life.

1. After each use: Empty hopper completely, remove trapped debris from bristles.
2. Weekly: Check wheel bearings for smooth rotation, lubricate if necessary.
3. Monthly: Inspect bristles for wear, replace if worn below 1 inch.
4. Seasonal: Clean entire unit with mild soap and water, dry thoroughly.
5. Storage: Store in dry location, avoid prolonged sun exposure.

CAUTION! Do not use high-pressure water or harsh chemicals for cleaning.

Safety Information

Always follow safety guidelines.

• Wear appropriate footwear with good traction
• Use gloves to protect hands from blisters
• Clear area of large objects before sweeping
• Do not exceed hopper capacity
• Keep children and pets away during operation
• Use on stable, level surfaces only

WARNING! Never attempt to sweep hot ashes, broken glass, or hazardous materials.

Warranty & Support

STIHL Limited Warranty: 2-year limited warranty against defects in materials and workmanship. Registration required within 10 days of purchase. For support, visit www.stihlusa.com or contact 1-800-467-8445. Keep original receipt for warranty claims.

Troubleshooting

Replacement Parts: Bristle strips, wheels, and hardware available from authorized STIHL dealers.

Service: 1-800-467-8445; www.stihlusa.com