Stihl BT360 Manual

The Stihl BT360 is a professional-grade battery-powered blower designed for demanding landscaping and cleanup tasks. Featuring a high-performance brushless motor, variable speed control, ergonomic design with anti-vibration system, compatibility with Stihl AP System batteries, lightweight construction, and low noise operation. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brushless electric motor, variable speed trigger, telescopic tube, ergonomic handle with anti-vibration, battery compartment, air intake grill, and nozzle.

Feature	Description
Brushless Motor	High efficiency, long lifespan, reduced maintenance
Variable Speed Trigger	Precise airspeed control from gentle to maximum power
Telescopic Tube	Adjustable length for user comfort and reach
Anti-Vibration System	Reduces operator fatigue during extended use
Battery Compartment	Compatible with Stihl AP 300, AP 500 batteries
Air Intake Grill	Protects motor from debris while allowing optimal airflow
Nozzle	Concentrated airflow for efficient debris movement
Lock-off Button	Prevents accidental activation
Battery Charge Indicator	Shows remaining battery capacity
Carrying Strap Attachment	For comfortable shoulder carrying during use

Assembly Instructions

Unpack and inspect all components. Ensure all parts are present before assembly.

1. Attach telescopic tube: Align arrows on tube sections, twist clockwise until click.
2. Install nozzle: Slide nozzle onto end of tube, secure with locking collar.
3. Mount handle: Slide handle onto main body, tighten screws with provided Allen key.
4. Install battery: Insert compatible Stihl AP battery into compartment until click.

WARNING! Do not operate without proper assembly. Ensure all connections are secure before use.

First-Time Setup

Prepare blower for initial operation following these steps.

1. Charge battery: Use Stihl AL 500 charger; charge fully before first use.
2. Install battery: Insert fully charged battery into compartment.
3. Test operation: Press lock-off button, then squeeze trigger to verify function.
4. Adjust tube length: Extend or retract tube to comfortable operating position.

CAUTION! Wear eye protection during operation. Keep bystanders at safe distance.

Specifications

• Motor Type: Brushless electric motor
• Air Speed: Up to 150 mph (241 km/h)
• Air Volume: Up to 700 CFM (330 m³/h)
• Noise Level: 65 dB(A) at 50 ft (15 m)
• Battery System: Stihl AP 300/500 Series
• Run Time: 30-90 minutes depending on battery and speed
• Weight: 8.8 lbs (4.0 kg) without battery
• Tube Length: Adjustable 24-40 inches (61-102 cm)
• Warranty: 2-year limited warranty

Controls and Operation

Main controls located on handle: Trigger, lock-off button, battery release.

Operation Steps:

1. Press and hold lock-off button
2. Squeeze trigger to start airflow
3. Adjust speed by varying trigger pressure
4. Release trigger to stop
5. Release lock-off button for safety

Variable Speed: Gentle pressure for light debris, full pressure for wet leaves/heavy material.

Battery Indicator: LED shows green (75-100%), yellow (25-75%), red (0-25%) charge.

Battery Installation & Charging

Compatible with Stihl AP 300 (36V) and AP 500 (36V) battery systems.

1. Insert battery: Align battery with compartment, slide in until audible click.
2. Remove battery: Press release button, pull battery straight out.
3. Charging: Use AL 500 charger; connect to battery, plug into 120V outlet.
4. Charge time: AP 300: 45 minutes; AP 500: 60 minutes to 80% charge.

Tip: Store batteries at room temperature. Avoid complete discharge for longest life.

Maintenance Procedures

Regular maintenance ensures optimal performance and longevity.

1. Daily: Clean air intake grill with soft brush.
2. Weekly: Inspect tube and nozzle for cracks or damage.
3. Monthly: Check all screws and connections for tightness.
4. Seasonal: Lubricate telescopic tube sliding surfaces with silicone spray.
5. Annual: Have authorized Stihl dealer perform motor inspection.

WARNING! Always remove battery before performing any maintenance.

Safety Features

Lock-off button: Prevents accidental activation. Thermal protection: Motor shuts off if overheated. Battery protection: Prevents over-discharge and over-temperature.

Care & Storage

Clean with dry cloth after use. Store in dry location. Remove battery for long-term storage.

CAUTION! Do not store with battery installed for extended periods. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. EPA compliant for commercial use. Copyright © 2023 Stihl Incorporated; all trademarks property of Stihl. For support, visit www.stihlusa.com or contact 1-800-467-8445.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blower won't start	Battery dead/not installed	Charge battery; ensure fully inserted until click.
Reduced air power	Blocked intake/clogged nozzle	Clean air intake grill; remove debris from nozzle.
Battery not charging	Faulty charger/temperature	Try different outlet; ensure battery at room temperature.
Motor stops during use	Overheating protection	Allow motor to cool for 15 minutes; reduce continuous run time.
Unusual noise/vibration	Debris in impeller/loose parts	Stop immediately; check for obstructions; tighten all connections.

Reset: Remove battery for 30 seconds to reset electronic controls.

Service: 1-800-467-8445; www.stihlusa.com for authorized dealers.